Sunday, April 03, 2011

the cost

I just had to deal with a very clueless customer. He ordered a set of dinner plates from me that he clearly thought were too expensive because he wanted a discount (I didn't give him one,) then started hounding me within a week about when they would be done, and groused bitterly about how long he had to wait. This customer, by the way, will never be allowed to order anything from me again, I keep a blacklist right next to my bed and his name is on it. I made an attempt to explain the process of making a set of anything ceramic, why it costs what it does, and why it takes longer than 5 days, but I don't think I got through to him. In fact, this person seemed to think I was taking his money and putting him on the back burner just to make him wait even longer. Which, after that conversation, I did.

It must be said that this customer type is very rare for me, most of my people are incredibly patient and tolerant of delays. Recently, I was trying to send out a bird creamer/sugar set to a customer. It's almost always small stuff that ties me up in knots. First, the creamer comes out and the yellow glaze on the bird ran over onto the robin egg blue of the creamer itself. The yellow glaze is very runny, and you have to glaze it in a very particular way to mitigate the running issue. Sold that one as a second, contacted the customer that the order would be late, and went for round two.

This time, the bird comes out perfect, but there is a big pinhole on the side of the piece. At this point, it's been 14 days since the order was placed. I fill in the pinhole with a mix of clay and glaze-- a trick I learned from Joanna Mendicino-- and pop it into my baby kiln which can do a firing cycle in 12 hours from pressing the button to pulling out the pieces. The creamer comes out great-- no more pinhole-- but I put the handle up against the side of the kiln like a total rookie, so now I have some kiln brick attached to the handle. I stomp around in a circle of fury for 10 seconds, then grind the kiln brick off, touch it up with some more glaze, back into the baby kiln. Next day, a perfect piece. Final count for this one $44 creamer: 16 days, 2 separate pieces, 5 firings, including the bisque firing.

And for those of you wondering, this customer was totally cool about it and thanked me for my quality control. You are welcome! And the plates? Out of the seven I made, the four I actually needed came out perfect, shipped off to the persnickety customer, for which I received a half-hearted "thank you." You're welcome... I think.